How to Make Your Own Shirt Pattern

Sharing is caring!

I drafted this shirt pattern straight from an existing shirt that I love to wear. I actually picked up this silky fabric last summer from a local fabric shop that had some big discounts, as they were relocating.

I’m just now getting around to using it. One of my favorite shirts is made from a similar material and I could see that the shirt pattern pieces were not too complicated. So I decided to create a shirt pattern from my existing shirt and put this beautiful silky fabric to good use.

This post contains affiliate links, I may earn a fee. Read more disclosure policy.

Fabric Notes:

When using an existing shirt to create your own pattern, it’s important to note the fabric. You’ll want to use comparable fabrics. You can interchange fabrics with a similar stretch and weight, but if they’re too different then your shirt will not turn out the same. For instance if your favorite shirt is a stretchy knit fabric that moves with you, then you’ll want to use a similar knit with similar stretch, not a woven cotton for instance which would have minimal stretch and be lighter. I am no fabric expert, but you can assess most fabric by feel. Stretching it on the bias (diagonally) will illustrate how stretchy. Just holding it, will tell you if it’s heavy or lightweight. Again, your fabrics need to be similar, not exactly the same!

Pattern Making Materials:

Pencil & Eraser

Large paper (butcher paper, tissue paper, tape together printer paper, recycled cardboard, etc)

Existing shirt

Sewing Materials:

Similar fabric to existing shirt

coordinating thread, scissors, sewing machine

shirt pattern

This is the shirt I will draft my pattern from. You can see that it has one front pattern piece and then two back pattern pieces. From one seam to the next is what will become your pattern piece.

Create your Pattern:

Lay out your paper.

Fold your shirt (according to the seam lines) & lay out on top of your paper.

shirt pattern

Trace around the pattern piece. As I trace, I add 1/4″ seam allowance, you can add more (1/2′ or 5/8″) if you like.

Mark where the fold of the fabric is on your pattern paper. For this shirt, to keep both side uniform, I fold the front when drawing the front pattern piece and label the fold. This way I will remember to fold my fabric likewise when cutting it out. So I would label it: Cut 1, & Fold (along the folded edge)

Write down any notes, like cut 2 pieces or cut one left & one right. For this shirt, I need one back piece for the left and one right.

Re-fold your shirt to accommodate the next pattern piece & repeat the process.

shirt pattern

Here is the neckline for the front and back. You can see all the edges are enclosed in bias tape. The back has a keyhole opening with a little loop button closure.

The Process:

shirt pattern

The basic construction of the shirt was simple. Sew together the two back pieces, leaving about 5″ for the keyhole opening. Then sew together the front piece and back pieces at the shoulders.

shirt pattern

Now all the raw edges are ready to be enclosed in bias tape. You can always purchase pre-made bias tape, in a variety of colors. I had plenty of this fabric and I like to hone my skills when I can so I made my own. They even have these nifty little bias tape tools to help with the folding now.

shirt pattern

Once my bias tape was made, I enclosed all the raw edges and sewed them closed. Since my material was ultra slippery I went over board on the pinning to ensure my raw edges stayed put when I passed them through the machine.

shirt pattern

It was a simple pattern and perfect for this fabric.

shirt pattern

I’m so glad I was able to get this shirt sewn and ready for summer wear!

shirt pattern
shirt pattern
My little man wanted to pose for pictures too, haha!
sig

Sharing is caring!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

2 Comments